If you aren’t involved from the roofing business, you likely do not have any clue what roofing battens or roof battening is. Most people think of roofs as being made of the materials that they can see. They seem at a roof and also watch shingles and presume that’s exactly what a roof program is, nevertheless, it isn’t.
A roofing program is made up of layers of materials which are utilised to construct a sturdy construction that can withstand the elements and take care of the building. Part of those layers of the roofing system can be roof battening, while one of the common materials for the battens are timber.
Understanding more about roof battens is vital for anyone who plans on doing roofing work, demands roof fix or is included in any area of building. Possessing a good comprehension of how a roof operates begins with understanding every part of the roofing system and how it plays a part in ensuring that the roof is working in a high standard.
What Are Battens?
Let’s get right down to the definition. Roofing battens sometimes called lath for roofing, provide the fix point for substances. Shingles and tiles have been affixed with the battens as spacing. Battens are not always used in a roofing system. Timber batten ceiling for example, are used for decorative purposes instead of structural.
Roofing battens or battening, also called roofing lath, are utilised to provide the fixing stage for roof materials such as shingles or tiles. The spacing of these battens rely on the type of roofing material and are implemented horizontally.
The spacing of this roof battening highly depends upon the form of exterior roofing material that is going to be utilised. By way of instance, metal roof will be attached to special metal roof battens. The batten seams are covered with batten joint and the metal sheets are attached at particular intervals. Exactly the same intervals may not be used for asphalt shingles. The dimensions of this roofing material will guide the spacing of the battens.
This technology has been in use because the 1950’s plus a is a trustworthy method of roofing that is preferred by many construction designers. It delivers the consistent dependable results that’s been used successfully for years.
Understanding the Layers of a Roofing
Every single roof starts with a truss system. The truss process is that the skeleton of the roofing and are often crafted from timber. Most homes have wooden truss systems. Once the trusses are set up a “deck” consists of timber.
The deck is the stage which other roofing material is attached to. The deck is covered with a layer of protective substances to which the tiles or shingles are directly attached to in certain scenarios. In other scenarios, the battens are installed, and the shingles, tiles or metal sheets have been attached to the batten.
Benefits of Roofing Batten Systems
Not each roof uses a batten system for example a membrane system doesn’t use a batten system. Membrane roofing is a flat roofing system. You don’t have to use a batten roofing system under most building codes. In some cases, it is necessary, but in the majority of cases using batten on your roof is a choice to acquire the advantages of utilising this system.
There are two options for roofing, a direct to deck system or even a roof batten system. The direct to deck system attaches the outside materials like panels or shingles right into the “deck” of the roof. There are a number of situations where a roof batten system must be used, like in cases where the HVAC system is on the roof, or even in the case of concrete tiles it’s better to use a batten system.